CM-530 main controller

CM-530 main controller

CM-530 main controller
Robotis | A-000000-00088
134.40 €
20 perc. French VAT inc.

Including €0.05 for ecotax

The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
Quantity
1 Available

Get it in 24/48h! (see T&C)

Payment methods (see T&C)
Debit card
PayPal
Payment by invoice
Wire transfer

Description of the CM-530 main controlleur

CM-350 main controller for dynamixel servomotors by robotis

The CM-350 main controller contains a ARM Cortex STM32F103RE microcontroller, 3-pin connectors to communicate using TTL protocol and 5-pin connectors to add devices (sensors for example). It is designed to command Dynamixel servomotors from the ranges AX (bioloid kits) and MX-xxT (DarwinOp robot. Warning: the MX-xxR servomotors use RS485 communication protocol).

The CM-350 main controller supports Bluetooth and Zigbee communications.

Connecting the CM-530 main controller

  • PC Link (Serial Cable): Use the included USB cable to connect the CM-530 main controller to your computer and download your code.
  • Communication Device Connection Jack: Used for wireless communicate with ZIG-110, IR receiver modules or other boards
  • Battery Jack: Used to connect with the Bioloid battery (11.1V LiPO battery, not included).
  • Power Jack: Used to connect the SMPS power supply (12V 5A, not included).
  • Power LED: ON and OFF LED for the power
  • Power Switch: Used to turn the robot ON / OFF.
  • MODE Button: Used to change the operation mode of CM-530. The three mode LEDS allow you to visualize the current mode:
    • MANAGE: Dynamixel Management Mode, used to set or test the operations of CM-530 and AX/MX Dynamixel using RoboPlus Manager. Automatically executed when RoboPlus Manager and CM-530 main controller are connected.
    • PROGRAM: motion edit mode, used when the motions are edited with RoboPlus Motion. Automatically executed when RoboPlus Motion and CM-530 main controller are connected.
    • PLAY: task code mode. Used after downloading the written code to CM-530 main controller with with RoboPlus Task. The Start button must be pressed directly by the user to execute when PLAY LED flickers.
  • START Button: Used to START selected mode.
  • Status Display LED: TxD LED is on while CM-530 main controller is transmitting the data to the outside, RxD LED is on while CM-530 main controller is receiving the data from the outside. The AUX led is at your disposal, it can be turned ON or OFF using task code.
  • U / L / D / R buttons: Used for input purposes when a program is playing on the CM-530 main controller. These buttons can be used to send commands to the robot.
  • AX/MX Serise Bus Port (3 pin): Used to connect the AX/MX-xxT Dynamixel servomotors in a daisy chain method.
  • Peripheral Devices Connection Port (5pin): Used to connect Distance Measurement Sensor, Touch Sensor, IR Sensor, and peripheral devices. The port numbers for each port are represented in bars such as I , II , III, IIII , IIIII , and IIIIII.

Specifications of the CM-530 main controller

  • Weight : 54g
  • Controller : ARM Cortex STM32F103RE
  • Working Voltage : 6V ~ 15V. Recommanded voltage: 11.1V (Li-PO 3cell)
  • Consumed Current
    • When IDLE : 50mA
    • Exterior I/O Maximum Current : 300mA
    • Overall Maximum Current : 10A (Fuse)
  • Working Temperature : -5℃~70℃
  • Internal I/O Device
    • 5 buttons
    • 1 microphon
  • External I/O Device
    • 6 OLLO Peripheral-Device Compatible 5 pin I/O Port
    • 5 3-Pin Connector for Dynamixel using TTL Communication
View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.

5 /5

Based on 1 customer reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    0
  • 5
    1
Sort reviews by :

Anonymous A. published the 10/04/2022 following an order made on 29/03/2022

5/5

Tutto ok, prodotto come da descrizione. Ottimo

Did you find this helpful? Yes 1 No 0

×
Accessories
Customers who viewed this item also viewed